Ford Bronco Online
Find new and used Ford Bronco Online at our automotive classifieds and Used Cars for Sale website Classifieds.CarForums.net
Q: where can i find an online ford 94 bronco Serpentine belt diagram?
i need to find an online ford 94 bronco Serpentine belt diagram.any free sites?
A: autozone.com
Q: design a ford bronco online?
A: do they still make those hudbuckets?
Q: How to change fuel pump on 1994 Ford Bronco?
I need to change the fuel pump on my 1994 Ford Bronco. I am confused. Where is the fuel pump located? Are there two fuel pumps? If there is two pumps. Which one should I change? I called the local stores like autozone and checker and they told me $130. But if I look online are ones for $65 such as the following.
http://broncograveyard.com/bronco/i-30257A_fuel_pump__33_gallon_bronco.htm
Please help. I am not sure what to order.
A: In a 94 Bronco you have one fuel pump located in the fuel tank (it is a high pressure pump, earlier models 85-90 used 2 pumps…a low pressure unit in the tank and a high pressure pump on the frame rail), to change it you drop the fuel tank, disconnect the lines and wiring connector, remove the lock ring and the pump and sender Assembly will lift out of the tank. Ford sells the pump and sender as a unit (which is why it is a little more expensive), some jobbers sell the pump and pick up as a partial unit and some sell just the pump itself….the main problem with buying just a pump is that NO ONE sells the connector seals that lock the pump to the pick up assembly and these are often damaged when removing the pump from the unit. I recommend the use of either the FORD complete pump and sender assembly or a pump and pick up assembly from the jobber stores.
Q: where can i find seals for a ford bronco?
Im looking for the camper top seals that go where the camper top meets the truck and is held in by screws. the seals are missing where can i find some online?
A: www.directfordparts.com
Q: 1986 Ford Bronco help!?
How do you replace the thermolstat on a 1986 Ford Bronco V8 with fuel injection? and is there a place online where i can see where it’s located? like an illustration????
A: It’s cheap and easy to do. Go to your auto parts store and buy a Chilton maintenance manual for your Bronco. It will have all the step by step instructions with pictures for just about anything you could want to do to your truck.
Q: ford bronco lift kit ????
im lookin online for a lift kit and came across this web site and there are a few kits for a good price but i was wondering what kit has the best parts and everything included out of these thanks for your help o and im lookin at 4 to 6 inch
http://www.car-stuff.com/mmparts/ford-bronco/suspension_kit.html
A: I have a Dick Cepek lift on my 95 Bronco. Make sure you opt for the new radius arms, it’s more expensive, but worth it.
Q: Ford Bronco Emergency (parking) Brake Part Question?
ok so theres this piece that the emergency (parking) brake cord hooks into that i pushed the parking brake too hard and popped it. its really worn and i need to know where i can find a new one. a store that i can walk into would be best, but i will buy online if i have to. i have no idea what the thing is called, but it is about 5inches long and it looks like a
____
| |
shape when viewed from the side. it has three holes in the top, the holes are open on one side so that the cord can go into the hole. kinda looks like the old timey key holes
0
/
but the bottom of the hole is cut out. if you have any remote idea what this thing is called and where i can get one id really appreciate it. thx
1996 ford bronco xlt
5.8L 302hp engine
A: Go to your local Ford dealer parts dept, they will be able to tell you what it is and might be able to locate the part
Q: ford bronco 2 ev conversion?
i have beed dreaming of converting my bronco 2 into an ev. its old and the carb is shot. it seems like the perfect candidate for the conversion. i have been searching online for a few days now and im not having any luck on finding the right componants for the swap. if anyone can shine some light on my situation i would be most greatful. im lookin to get at least 60mph and at least 50mile range.
A: I know they made some electric Rangers in the 90’s, seems they were used in the Sacramento area and some of them showed up on Ebay… maybe you could use one of them for parts…
Q: I have 88 ford bronco II?
we put new clutch slave cylinder, new clutch master cylinder and new hoses. Every time we try to bleed it and every time the clutch starts getting hard. the hose comes out of the slave cylinder. and we don’t know why. we think it is the ring inside the slave cylinder. so where can I find the ring online.
A: Auto Zone is bragging about their new computerized parts system. Go give them a shot and see if they can get it for you. If it’s in their system it should be only a day’s wait.
Q: “Replacement knobs for 1990 Ford Bronco”?
I need interior replacement knobs for my headlights and windsheild wipers. Any idea where I can find them? I’ve had no luck online or in auto stores. Thanks.
A: See if this link works: http://www.lmctruck.com/icatalog/fd/0033.html
Or cut+paste it. If not then go to LMCtruck.com. To the Ford truck catalog “1980-1996″ on page 33.
Q: THE BIGGEST LIFT KIT FOR A BRONCO II?
whats the biggest lift kit you can get for a 86 ford bronco II and were can i find it on online at??
A: idk if its right but the highest i could find was a 9 in. i will keep looking and if i find more, i will post. good luck 
Q: how to replace a slave clyinder?
I have a 1988 ford bronco II 4w drive manual tramsmission. Is there any where online that will tell me step by step how to replace one.
the slave cylinder in the transmission.
I have to drop the transmission to replace it.
A: Are you asking about the slave cylinder for the transmission or for a drum brake?
Here are step by step instructions on how to replace the slave cylinder for the manual transmission:
http://www.autozone.com/servlet/UiBroker?ForwardPage=/az/cds/en_us/0900823d/80/11/38/79/0900823d80113879.jsp
Here are step by step instructions on how to replace the brake slave cylinder for drum brakes:
http://www.autozone.com/servlet/UiBroker?ForwardPage=/az/cds/en_us/0900823d/80/11/39/22/0900823d80113922.jsp
Q: I need help with Lifts and Tires..!!!?
I just got a 79 ford bronco and i was trying to lift it with a suspension and body lift and am also trying to get new tires.
what is the cheapest most reliable online store for this?
A: Discount tires online.
Q: fuel efficient parts?
i have a 1990 ford bronco with 2 inches of lift on 33 inch tires, I’m currently getting around 14 miles to the gallon on the highway. i would like to know whats the best way to increase my mpg. i have been looking at several parts online but still unsure the best way to go. any input would be greatly appreciated
A: We have an ‘88 with the 351 inch Windsor, yeah they suck gas. The best thing to improve your mileage is to tie a helium balloon to the gas peddle so’s you don’t push it to hard. Good Luck !
Q: Building off-road vehicle, need engine and transmission, axles?
I have a 1990 Ford Bronco that is receiving a 6″ Rough Country suspension lift and 35″ tires. This is strictly and off road vehicle for a patch of land in the Northwest, and while it may see some on road use, its going to be used only a few times a year and when it is, it will be miles away from anything.
Problem: locating a decent engine, transmission, and some axles for the thing. I know of some shops willing to sell them to me, but none that will ship to my location out west and none that I really trust. I can find TONS of shops online willing to sell engines and transmissions but mostly they are performance pieces, not geared towards the off-road.
Anyone know of a good website (or shop with website and/or phone number and long distance shipping) that carries Ford engines, transmissions, and some good off road axles?
Note: I’d like to keep the engine fuel injected. When I’m 10 miles from the nearest tow, in the middle of the woods, I’d rather not accidentally get too sideways for a carb and flood it.
Sure, its more work up front but I’m willing to deal with that to save mounds of pain later. So if you were about to recommend your favorite classic engine website, sorry. The 5.4L engine and transmission in the new F-150s or the old 5L that was in the Bronco originally would be nice if anyone knows how to get them.
I need a place to BUY the parts, I already know what I’m looking for.
And btw, I don’t want to go with a huge steel diesel engine and big, overweight axles. This isn’t a rock crawler, and a real off road car saves on weight everywhere it can, keeping the weight as closely as possible to on the tires and wheels, not in a high center of gravity. All that just makes it unstable.
A: ah you need a 7.3 turbo international coupled to a six speed allison.and use rockwell deuce and a halfs.
Related Posts